Split-type cooling circulating water machine DW-LS-F series

 

Split chillers are composed of indoor units and outdoor units, respectively, installed in the indoor and outdoor, the middle through the pipeline and wire connected to the cooling water recycling equipment. Indoor unit mainly includes evaporator, temperature display controller, water tank, circulating water pump. The outdoor unit mainly includes refrigeration compressor, fin type, cooling fan.

Split Cooling Circulating Water Machine Main Features

1, split structure: the innovative use of the split structure, the larger noise of the compressor and axial fan and indoor chilled water circulation part of the two boxes, the larger noise of the compressor and axial fan Installed in the outdoor chassis, the indoor unit lined with silencing materials, so the noise than the integrated chiller has greatly reduced.

2, the control is simple: the cooling system controlled by the microcomputer, in the laboratory can be adjusted and control the temperature of the water, easy to operate.

3, the noise is very small: can be less than 40 ~ 50dB, outdoor machine noise at 60dB-70dB.

4, the protection device is complete: lack of protection, reverse protection, compressor overload protection, fan overload protection, pump overload protection, high and low pressure system protection, leakage protection, water tips, compressor anti-frequent start protection devices.

5, the temperature range of 5 ℃ to 30 ℃, the water can be more practical needs adjustment.

6, handsome in appearance: simple and innovative design, with the natural environment, excellent shape combined with cutting-edge technology for the outstanding performance of science and technology.

7, pipe material: pipe all 304 stainless steel.

8, space-saving special design, 30kw below the thickness of the machine is only 390mm, can be directly installed in the balcony, roof or floor without room, can save space, indoor and standard non-standard type For free choice.

9, the evaporator with high efficiency plate heat exchanger, which reduces the size of the body, but also improve the unit heat transfer efficiency, improve the COP value.